Thursday, March 10, 2011
Abe Buzzard (aka "Uncle Earl")
Sunday, March 06, 2011
Earl by another name
Good job, Connor. Looking forward to seeing a photo or video of "Connor & Clarence" in action.
Friday, March 04, 2011
Will he learn to yodel?
My blog and dummy-makin' may slow down for a short while as I pack everything up and move to a new home. Among the cool things about my new residence is I'll get a 400 sq.ft. workshop out of the deal. You may recall that I've been doing my work in a small upstairs bedroom all this time. It will be wonderful to have much more room to build and create.
Wednesday, February 23, 2011
Mr. D's Earl
Along the way, Clinton passed along some great advice for me. I planned to make some revisions on my jaw designs and Clinton's observations have been very helpful.
Wednesday, February 09, 2011
On the move
Sometimes we must disrupt our own lives on purpose. Such is the case now. We're in the process of buying a new home in Bandon, Oregon. Though it will be a smaller home (ah... a chance to downsize!), I will have a much larger workshop for my dummy making. I can hardly wait!
Meanwhile, a question and answer...
Q: I bought a "Cheeky Boy" head from Braylu. I can't for the life of me figure out where to drill in the jaw to set the thing so it will open and close correctly. I read your blog (OK... I skimmed through it quickly) and didn't see anything about my particular problem. Can you give me a pointer or two? Thanks.
A: I’ve posted a photo with an arrow pointing to where the hole should be drilled to insert and mount your axle tube. As you will see, the place to drill is the upper back corner. I use a 1/8” drill bit. I insert a length of 1/8” inch brass tube. I file the holes to make sure the axle tube is straight across. I use Magic-Sculpt to epoxy the tube in place.
Then... after the axle is solidly set…
• I insert a 3/32” brass rod (cut 3-1/2” long) through the tube for the axle. I put the jaw with the brass axle in the head and place the jaw in its closed position and well-placed as I can. If the brass axle is a little long, thus preventing the jaw to move far enough forward, I trim the axle length.
• Holding the jaw closed in place, I note and mark where the ends of brass axle touch the interior sides of the head. (I like to use a Sharpie to make the marks).
• I remove the jaw and make slots for the axle on each side of the head with Magic-Sculpt, placing it approximately where I marked.
• I put a little Vaseline on the ends of the axle ends and re-fit the jaw in the head so the axle ends sink into the Magic Sculpt to form slots. I try to “massage” it into the best position for the jaw to open and close. It may be a little tight or loose, but you can always file, sand or fill for the smooth movement and good fit later.
• Making sure the slots I’ve formed are open enough so the jaw and axle can slip out easily (thus the Vaseline), I leave them in place until the Magic-Sculpt firms up (about an hour). Then I remove the jaw and axle to continue the finish work on both the jaw and head. The Magic-Sculpt will harden completely overnight. (See photos below)
Meanwhile, a question and answer...
Q: I bought a "Cheeky Boy" head from Braylu. I can't for the life of me figure out where to drill in the jaw to set the thing so it will open and close correctly. I read your blog (OK... I skimmed through it quickly) and didn't see anything about my particular problem. Can you give me a pointer or two? Thanks.
A: I’ve posted a photo with an arrow pointing to where the hole should be drilled to insert and mount your axle tube. As you will see, the place to drill is the upper back corner. I use a 1/8” drill bit. I insert a length of 1/8” inch brass tube. I file the holes to make sure the axle tube is straight across. I use Magic-Sculpt to epoxy the tube in place.
• I insert a 3/32” brass rod (cut 3-1/2” long) through the tube for the axle. I put the jaw with the brass axle in the head and place the jaw in its closed position and well-placed as I can. If the brass axle is a little long, thus preventing the jaw to move far enough forward, I trim the axle length.
• Holding the jaw closed in place, I note and mark where the ends of brass axle touch the interior sides of the head. (I like to use a Sharpie to make the marks).
• I remove the jaw and make slots for the axle on each side of the head with Magic-Sculpt, placing it approximately where I marked.
• I put a little Vaseline on the ends of the axle ends and re-fit the jaw in the head so the axle ends sink into the Magic Sculpt to form slots. I try to “massage” it into the best position for the jaw to open and close. It may be a little tight or loose, but you can always file, sand or fill for the smooth movement and good fit later.
• Making sure the slots I’ve formed are open enough so the jaw and axle can slip out easily (thus the Vaseline), I leave them in place until the Magic-Sculpt firms up (about an hour). Then I remove the jaw and axle to continue the finish work on both the jaw and head. The Magic-Sculpt will harden completely overnight. (See photos below)
Thursday, January 27, 2011
Eyelets
A: Yes. I attach a cord to each eyelet. The cord is strung over the pulley bar in the back pf the head and down the headstick. It's attached to a trigger. When the trigger is pulled, the eyes are tugged inward, thus crossing the eyes. When released, the springs return the eyes to the center position.
Sunday, January 23, 2011
Spring has sprung
I received a comment on my "Wired" posting that proved to be very helpful for centering the iris in the eye socket. The suggestion was that I tweak the self-centering spring rather than wire the spring. And it worked like a charm.
What a great idea. Thanks!
Wednesday, January 19, 2011
Friendship

The photo is a bit soft and dark, but if you look carefully, you'll see Mr. Fenster sitting on his new partner's knee. Mr. Fenster's pal is named Michael and he lives in Pennsylvania. Michael's wife reports that he's practicing his ventriloquism very diligently. I hope Michael and Mr. Fenster are giving audiences the giggles very soon.
Saturday, January 15, 2011
Wired
Yes, I've had way too much coffee today. But that has nothing to do with the title of this post.
I've been making my own eyes. I've been placing the irises (which were printed out on a computer) after placing the eyeballs inside the head because the eye sockets are not always perfectly straight forward and even with each other. By placing the irises after placing the eyes inside the head, I could make sure the irises were centered. However, this process denied me the use of the really nice plastic irises that are pre-installed and centered on those lovely cast eyes sold by Braylu Creations and Puppets and Props.
Until I figured out a new way to center the pre-installed irises in the eye socket. (At least new to me).
- I place a small screw eye in the center-back of the synchro bar
- I take a length of 22-gauge wire and insert it between the coils of the spring behind the eye that needs to be centered.
- I tug the wire enough to pull the spring inward enough to position the eye properly.
- I insert one end of the wire through the screw eye and twist the ends of the wire to secure it.
- I trim the excess twisted wire.
- Now the iris is centered properly in the eye socket and still bounces back into position for self-centering.
Lost
You remember Clifton, don't you? Well, he was sent to Spain to meet his new partner. Somehow Clifton ran afoul of Spanish Customs and has been rejected for some unknown reason. His new partner has informed me that Clifton is on his way back to me. What's worrisome is that he was sent back a month ago and he's still not back. His new partner wants me to send him back again, this time to an alternate address in the UK. We're hoping Clifton will clear British Customs more easily than Spanish Customs.
But so far, Clifton is missing. Maybe he was sent back by boat.
Monday, January 10, 2011
After sessions of obsession

After gallons of coffee, beaucoup bags of Cheetos, hours of time spent in front of my computer, and days in my pajamas with no shower or shave, I have completed my new website. I hope you find it nice-looking and easy to navigate.
To run it through its paces, just click on the "Kenny Croes Dummy Store" graphic on the left side of the blog.
Sunday, January 09, 2011
Rhinoplasty
Friday, January 07, 2011
The "pain" in painting
Q: I've been working on my own figures and use your site as a reference a lot and had a question for you. Do you have issues with your paint coming off a lot? I have a Mike Brose head which I have sanded and washed a lot and the paint still comes off way too easily. When I mean comes off, you can literally put it in water and use your hand to show perfectly clean resin underneath. I've been using Folkart craft paint could this be the problem?
A: It's important to apply a coat of primer before applying your acrylic paint. In addition, acrylic paint dries to the touch very quickly, but actually takes about a week to dry completely. For quality's sake, I use artist-quality acrylic paints (available at your local art supply store) rather than craft paints (like Folkart). Mike Brose's book "Figure Making Can Be Fun" has an excellent section on painting figures. It's well-worth the investment.
A: It's important to apply a coat of primer before applying your acrylic paint. In addition, acrylic paint dries to the touch very quickly, but actually takes about a week to dry completely. For quality's sake, I use artist-quality acrylic paints (available at your local art supply store) rather than craft paints (like Folkart). Mike Brose's book "Figure Making Can Be Fun" has an excellent section on painting figures. It's well-worth the investment.
Sunday, January 02, 2011
Eye-dle chat
Here's a shot of Elmore with the 1.5" Mike Brose eyes. It's hard to tell in this photo, but I altered the jaw so it opens much wider. To do that, I essentially sawed off the chin and used Magic-Sculpt to build a new chin.
I'm also going to install teeter-totter-style eye mechanics rather than my usual brass tube and rod mechanics. Buzz James of Braylu Creations designed a new teeter-totter trigger that I'm anxious to try.
Subscribe to:
Posts (Atom)